The area where the en-suite will be situated
At the planning stage - thinking there is enough work making a bath from tadelakt I already have bought the conventional basin as can be seen in the picture below
Forming the en-suite walls out of timber studwork. The timber was second hand previously used as a packing crate for an Aston Martin (not mine unfortunately!)
The area where the bath will be situated.
Making the bath framework out of blockboard
Timber framework in position and being covered with metal lathing to ensure plaster will adhere properly.
Bucket of lime plaster ready to start applying to mesh and form a few curves. I'm applying this to all corners where the thickness of plaster will be the greatest -- just to allow for adequate drying and shrinkage time.